Dh-satellite Gibralter Ge-Mini Manuel d'utilisateur

Congratulations! You have now purchased the finest Dual Powered Azimuth-Elevation Mount available. This unit will not only track the geosy

MISSING PARTS WARRANTY You have obtained one of the best antennas on the market today! We hope that you will be happy with your new DH Antenna. To

Parts List for: The “Dual Powered Ge-mini” Gibralter Gemini Mount w/8'&9’ Antenna 6 1/2" Lock Washers 6 1/2" Nuts 6

2"1/2"1 1/2"2"17/32" HoleEndSideTopTabs14 1/2"3/4"38 1/2"1/4" x 3" Fins 1/2" x 18" x 18&q

1/2" x 18" x 18" Plate12"3"3"6" O.D. Pipe3/16" Wall3/4" x 1 1/2" Set Screws (4)8 1/2"8 1/2"

INSTALLATION OF BASE Look at the drawings below. Figure #1 shows a typical recommended concrete base. This base should be a minimum of 3’0”x3’0”x

Assemble Ring to Base Stand (for the 2.4m & 2.7m) You will have to assemble the 39” ring to the Ge-Mini base. Look at the photo of the mount

Assembling the Antenna to the Ring (2.4m &2.7m) The mount should be assembled at this point. Now it is time to install the antenna

Preparing the feed assembly If the feed horn you have selected has an adjustable scalar ring, move it to the proper wave-guide setting. The 2.4M, 2

Final Inspection of the Antenna After the assembly is complete, we recommend that you visually look at the dish for FOUR things. 1. Make sure that